Dr. Mohamed S. Hamed, P. Eng.
 Professor
B.Sc., M.Sc. (Alexandria), Ph.D. (Western Ontario)


Home

Research

Courses

Publications

Experience

Activities

TPL

 


 


SELECTED PUBLICATIONS

Journal Publications:-

  1. Hassan, A., and Hamed, M.S., "Towards achieving vision 2020 goals of the heat treating industry", Accepted, The Journal of Minerals, Metals, and Materials Society (TMS).

  2. Wang, H.,  Shankar, S., and Hamed, M.S.," Sensitivity of thermophysical material properties on solidification simulation of Al-Si binary alloys", Metallurgical Transactions A, 25 February 2011, pp. 1-12, doi:10.1007/s11661-011-0617-zKey:cireulike:8939999.

  3. Wang, H.,  Shankar, S., and Hamed, M.S.," Effect of shrinkage on primary dendrite arm spacing during binary Al-Si alloy solidification", Accepted, Metallurgical Transactions A.

  4. Wang, H., Hamed, M.S., and Shankar, S., "Effect of Shrinkage on Al – Si alloy solidification", submitted to the Journal of Computational Thermal Sciences".

  5. Malik, M.M., Jeyakumar, M., Hamed, M. S., Walker, M. J., Shankar, S., "Rotational Rheometry of Liquid Metal Systems: Measurement Geometry Selection and Flow Curve Analysis", Journal of Non-Newtonian Fluid Mechanics,165 (2010) 733–742.

  6. M. Marivani and M.S. Hamed, "Numerical Modeling of Sloshing Motion in a Tuned Liquid Damper Outfitted with a submerged Slat Screen", Int. Journal of Numerical Methods in Fluids, available on-line January 12, 2010, 22 pages.

  7. Ali, S., Hamed, M.S., and Lightstone, M.F., "A Modified online input estimation algorithm for inverse modeling of steel quenching”, Numerical Heat Transfer, Part B, 56:1-19, 2009.

  8. Home, D., Arvanitis, G., Lightstone, M.F., and Hamed, M.S, "Simulation of flow pulsations in a twin rectangular subchannel geometry using unsteady Reynolds averaged Navier-Stokes modelling", Nuclear Engineering and Design, 239,  2964-2980, 2009.

  9. Omar, A.M.T., Hamed, M.S., and Shoukri, M., "Modeling of nucleate boiling heat transfer under an impinging free jet",

    International Journal of Heat and Mass Transfer, Volume 52, Issue 23-24, pp. 5557-5566, 2009.

  10. M. Marivani and M.S. Hamed, "Numerical Simulation of Structure Response Outfitted with a Tuned Liquid Damper", Journal of Computers and Structures, Volume 87, Issues 17-18, pp. 1154-1165, 2009.

  11. Home, D., Lightstone, M.F., and Hamed, M.S., ‘Validation of DES-SST based turbulence model for a fully developed turbulent channel flow problem’,  Numerical Heat Transfer, Part A: Applications, Volume 55, Issue 4, pp. 337 - 361, 2009.

  12. Ali, S., Hamed, M.S., and Lightstone, M.F., "Numerical study of the modelling error in the online input estimation algorithm used for inverse heat conduction problems (IHCPs), Journal of Physics: Conference Series, v 135, p 012004 (8 pp.), 2008.

  13. Ali, S., Hamed, M.S., and Lightstone, M.F., "An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods", Journal of ASTM International, Volume 5, Issue 10 November 2008.

  14. Akmal, M., Omar, A.M.T., and Hamed, M.S., “Experimental Investigation of Propagation of Wetting Front on Curved Surfaces Exposed to an Impinging Water Jet”, International Journal of Microstructure and Materials Properties (IJMMP), Vol. 3, No 4/5, 2008.

  15. Hassan, A., and Hamed, M.S., "Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces",  Journal of ASTM International, Vol. 5, No. 1, 2008.

  16. Elsaadawy, E., Mortazavi, H., and Hamed, M.S., "Turbulence Modeling of Forced Convection Heat Transfer  in Two-Dimensional Ribbed Channels", ASME Journal of Electronic Packaging, Vol. 130, pp. 031011-1 to -17, September 2008.

  17. Wang, H., and Hamed, M.S, ”Flow Mode-transition of Natural Convection in Inclined Rectangular Enclosures Subjected to Bidirectional Temperature Gradients”, Int. Journal of Thermal Sciences, Vol. 45, pp. 782-795, 2006.

  18. Siddique, M.R., Hamed, M.S., and El Damatty, A.A., “A nonlinear numerical model for sloshing motion in tuned liquid dampers”, Int. Journal of Numerical Methods in Heat and Fluid Flow, Vol. 15, No. 3, pp. 306-324, 2005.

  19. Hamed, M.S., and Akmal, M., “Determination of Heat Transfer Rates in Industry-Like Spray Quench System with Multiple Impinging Water Jets”, Int. J. of Materials & Production Technology (IJMPT), Vol. 24, pp. 184-198, 2005.

  20. Wang, H., and Hamed, M.S, ”Flow mode-transition of natural convection in inclined complex enclosures”, WIT Transactions on Modeling and Simulation, Vol. 41, pp. 803-815, 2005.
     

  21.  Hamed, M. S., and J. M. Floryan, “Maragoni convection – the case of a cavity subject to point heating”, Journal of Fluid Mechanics, Vol. 405, pp. 79-110, 2000.
     

  22.  Hamed, M. S., and J. M. Floryan, “Maragoni convection – the case of a cavity with differentially heated side walls”, Journal of Fluid Mechanics, vol. 405, pp. 111-129, 2000.
     

  23.  Hamed, M. S., and J. M. Floryan, “Numerical simulation of unsteady non-isothermal capillary interfaces”, Journal of Computational Physics, Vol. 145, pp. 110-140, 1998.

Conference Publications:-

  1. Friedrich, K., Hamed, M. S., Razaqpur, G., and Foo, S., "Achieving Sustainable Energy Savings Using Solar Airflow Windows", to be presented at The 10th International Conference for Enhanced Building Operations, Kuwait, 26-28 October, 2010.

  2. Ahmed, O., and Hamed, M.S., "On Pool Boiling of Nanofluids", The 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , Antalya, Turkey, 19-21 July 2010.

  3. Ahmed, O., and Hamed, M.S., "The Effect of Experimental Techniques on the Pool Boiling of Nanofluids” , The International Conference on Multiphase Flow, ICMF-2010, Tampa, FL, USA, May 30-June 4, 2010.

  4. Omar, M.T., Hamed, M.S., Shoukri, M.,"On the Bubble Dynamics Under an Impinging Free Planar Jet", ECI International Conference on Boiling Heat Transfer, Florianópolis-SC-Brazil, 3-7 May, 2009.

  5. Srirangam, S.P., Malik, M.M., Jeyakumar, M., Walker, M., Hamed, M.S., Shankar, S., "Effect of Strontium on Viscosity and Liquid Structure of Al-Si Eutectic Alloy", TMS Annual Meeting & Exhibition, SAN FRANCISCO, CALIFORNIA, FEBRUARY 15-19, 2009.

  6. Jeyakumar, M., Mousa, M., Hamed, M.S., Shankar, S., "Heat Treatment of A356.2 Aluminum Alloy: Effect of Quench Rate and Natural Ageing", TMS Annual Meeting & Exhibition, SAN FRANCISCO, CALIFORNIA, FEBRUARY 15-19, 2009.

  7. Takrouri1, K., Luxat, J., Hassan, A., and Hamed, M.S., "Heat Transfer and Two-Phase Flow Behaviour during Quench of Hot Horizontal Cylindrical Tubes", The Fourth International Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, January 12-14, 2009.

  8. Home, D., Lightstone, M.F., and Hamed, M.S., ‘Numerical investigation of turbulent flow in a twin rectangular sub-channel geometry’, 32nd CNS Annual Conference, Toronto, June 1-4, 2008.

  9. S.K. Ali, M.S. Hamed, and M.F. Lightstone, “Numerical study of the modeling error in the online input estimation algorithm used for inverse heat conduction problems (IHCPs)”, The 6th International Conference on Inverse Problems in Engineering: Theory and Practice, Dourdan (Paris), France, June 15-19, 2008 .

  10. Hongda Wang, M.S. Hamed, and S. Shankar, “EFFECT OF SHRINKAGE ON Al – Si ALLOY SOLIDIFICATION”, The Computational Heat Transfer-CH08 Conference,  Marrakech, Morocco, May 11-16, 2008.

  11. Home, D.,Lightstone, M.F., and Hamed, M.S., "Detached Eddy Simulation Based Turbulence Modeling Approach for Inter Sub-Channel Thermal Mixing", The 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-12),Sheraton Station Square, Pittsburgh, Pennsylvania, U.S.A. September 30-October 4, 2007.

  12. Omar, M.T., Hamed, M.S., and Shoukri, M., "Experimental Study of Steady State Nucleate Boiling Heat Transfer Under Planar Jet Impingement", The 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-12), Sheraton Station Square, Pittsburgh, Pennsylvania, U.S.A. September 30-October 4, 2007.

  13. Khafagy, A.E., Chuang, D, Schweitzer, J., and Hamed, M.S., “Two-Phase Flow inside Automotive Torque Converters”, The International Conference on Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9-13, 2007.

  14. Omar, M.T., Hamed, M.S., Shoukri, M., "Nucleate Boiling Heat Transfer under Liquid Jet Impingement", ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, BC, Canada, July 8-12, 2007.

  15. Wang, H., Shankar, S., and Hamed, M.S., “Numerical model for binary alloy solidification”, The 5th International Conference on Computational Heat and Mass Transfer (ICCHMT), Canmore, Alberta, Canada, June 18-22, 2007.

  16. Ali, S.K., Lightstone, M.F., and Hamed, M.S., "Parametric study of input estimation algorithm used for inverse heat conduction problems (IHCPs)",  The 15th Annual Conference of the CFD Society of Canada, Toronto, Ontario, May 27-31, 2007.

  17. Home, D., Lightstone, M.F., and Hamed, M.S., "Applicability of DES-SST based Turbulence Model for Turbulent Channel Flow Problem", the 15th Annual Conference of the CFD Society of Canada, Toronto, May 27-31,2007

  18. Malik, M.M., Lambotte, G., Hamed, M.S., Chartrand, P., and Shankar, S., “How to measure viscosity of liquid aluminum alloys”, TMS 2007 Annual Meeting, February 25-March1,Orlando, Florida, 2007.

  19. Hassan, A., Curtis, C. Hamed, M.S., and Shoukri, M., “How to Load a Batch-Type Furnace”, TMS 2007 Annual Meeting, February 25-March1,Orlando, Florida, 2007.

  20. Chen, Yi, Hamed, M.S., and Coly, K., “Numerical Simulation of Marangoni Convection in Refractory Slag Line Dissolution”, 14th Annual Conference of the Computational Fluid Dynamics Society of Canada, Heat Transfer II, Kingston, Ontario, June 16-19, 2006.

  21. Wang, H., and Hamed, M.S., “Effect of side wall thermal conditions on natural convection in inclined enclosures”, 12th Annual Conference of the CFD Society of Canada, Heat Transfer I, pp. 262-269, Ottawa, Ontario, May 9-12, 2004.  This paper has won the first prize in the student-paper competition.

 

• Home • Research • Courses • Publications • Industrial Experience • Professional Activities • TPL •

This page last updated July 2012

Website Design by Sally Hamed.
Copyright © 2006 McMaster University. All rights reserved.